Golf - Stroke Mechanics

Stroke Mechanics

Golfers start with the non-dominant side of the body facing the target. At address the body and club are positioned parallel to the target line. The feet are commonly shoulder-width apart for middle irons and putters, narrower for short irons and wider for long irons and woods. The ball is positioned in the centre of the player's stance for short irons and putters, more to the front for middle irons and even more for long irons and woods. The golfer chooses a golf club, grip, and stroke appropriate to the distance:

• The "drive" or "full swing" is used on the teeing ground and fairway, typically with a wood or long iron, to produce the maximum distance capable with the club.
• The "approach" or "3/4 swing" is used in medium- and long-distance situations where an exact distance is preferable to maximum possible distance, such as to place the ball on the green or "lay up" in front of a hazard.
• The "chip" or "half-swing" is used for relatively short-distance shots near the green, with high-lofted irons and wedges. The goal of the chip is to land the ball safely on the green, allowing it to roll out towards the hole. It can also be used from other places to accurately position the ball into a more advantageous lie.
• The "putt" is used in short-distance shots on or near the green, typically made with the eponymous "putter", although similar strokes can be made with medium to high-numbered irons to carry a short distance in the air and then roll (a "bump and run"). The goal of the putt is to put the ball in the hole, although a long-distance putt may be called a "lag" and is made with the primary intention of simply closing distance to the hole or otherwise placing the ball advantageously.

Having chosen a club and stroke to produce the desired distance, the player addresses the ball by taking their stance to the side of it and (except when the ball lies in a hazard) grounding the club behind the ball. The golfer then takes their backswing, rotating the club, their arms and their upper body away from the ball, and then begins their swing, bringing the clubhead back down and around to hit the ball. A proper golf swing is a complex combination of motions, and slight variations in posture or positioning can make a great deal of difference in how well the ball is hit and how straight it travels. The general goal of a player making a full swing is to propel the clubhead as fast as possible while maintaining a single "plane" of motion of the club and clubhead, to send the clubhead into the ball along the desired path of travel and with the clubhead also pointing that direction.

Accuracy and consistency is typically stressed over pure distance. A player with a straight drive that only travels 220 yards will nevertheless be able to accurately place the ball into a favorable lie on the fairway, and can make up for the lesser distance of any given club by simply using "more club" (a lower loft) on their tee shot or on subsequent fairway and approach shots. However, a golfer with a drive that may go 280 yards but often doesn't fly straight will be less able to position their ball advantageously; the ball may "hook", "pull", "draw", "fade", "push" or "slice" off the intended line and land out of bounds or in the rough or hazards, and thus the player will require many more strokes to hole out.