Glossary of Firearms Terms - S

S

• sabot: a device used in a firearm to fire a projectile, such as a bullet, that is smaller than the bore diameter.

• safety: A mechanism used to help prevent the accidental discharge of a firearm, helping to ensure safer handling. Safeties can generally be divided into subtypes such as internal safeties (which typically do not receive input from the user) and external safeties (which typically allow the user to give input, for example, toggling a lever from "on" to "off" or something similar). Sometimes these are called "passive" and "active" safeties (or "automatic" and "manual"), respectively.

• sawed-off shotgun/short-barreled shotgun (SBS): a type of shotgun with a shorter gun barrel and often a shorter or deleted stock.

• selective fire: A firearm that fires semi–automatically and at least one automatic mode by means of a selector depending on the weapon's design. Some selective fire weapons utilize burst fire mechanisms to limit the maximum or total number of shots fired automatically in this mode. The most common limits are two or three rounds per pull of the trigger.

• semi-wadcutter or SWC: A type of all-purpose bullet commonly used in revolvers which combines features of the wadcutter target bullet and traditional round nosed revolver bullets, and is used in both revolver and pistol cartridges for hunting, target shooting, and plinking. The basic SWC design consists of a roughly conical nose, truncated with a flat point, sitting on a cylinder. The flat nose punches a clean hole in the target, rather than tearing it like a round nose bullet would, and the sharp shoulder enlarges the hole neatly, allowing easy and accurate scoring of the target. The SWC design offers better external ballistics than the wadcutter, as its conical nose produces less drag than the flat cylinder.

• shooting range: a specialized facility designed for firearms practice.

• shooting sticks: are portable weapon mounts.

• short-barreled rifle (SBR): a legal designation in the United States, referring to a shoulder-fired, rifled firearm with a barrel length of less than 16" (40.6 cm) or overall length of less than 26" (66.0 cm).

• single-action: Usually referring to a pistol or revolver, single-action is when the hammer is pulled back manually by the shooter (cocking it), after which the trigger is operated to fire the shot. See also double-action.

• single-shot: A firearm that holds only a single round of ammunition, and must be reloaded after each shot.

• slamfire: a premature, unintended discharge of a firearm that occurs as a round is being loaded into the chamber.

• sleeving: A method of using new tubes to replace a worn-out gun barrel.

• slide bite: A phenomenon which is often grouped with hammer bite. In this case the web of the shooting hand is cut or abraded by the rearward motion of the semi-automatic pistol's slide, not by the gun's hammer. This most often occurs with small pistols like the Walther PPK and Walther TPH that have an abbreviated grip tang. This problem is exacerbated by the sharp machining found on many firearms.

• sling: is a type of strap or harness designed to allow an operator carry a firearm (usually a long gun such as a rifle, carbine, shotgun, or submachine gun) on his/her person and/or aid in greater hit probability with that firearm.

• snubnosed revolver: a revolver with a short barrel length.

• speedloader: A device used for loading a firearm or firearm magazine with loose ammunition very quickly. Generally, speedloaders are used for loading all chambers of a revolver simultaneously, although speedloaders of different designs are also used for the loading of fixed tubular magazines of shotguns and rifles, or the loading of box or drum magazines. Revolver speedloaders are used for revolvers having either swing-out cylinders or top-break cylinders.

• spitzer bullet: an aerodynamic bullet design.

• sporterising, sporterisation, or sporterization: The practice of modifying military-type firearms either to make them suitable for civilian sporting use or to make them legal under the law.

• squib load, also known as squib round, pop and no kick, or just squib: A firearms malfunction in which a fired projectile does not have enough force behind it to exit the barrel, and thus becomes stuck.

• stock: The part of a rifle or other firearm, to which the barrel and firing mechanism are attached, that is held against one's shoulder when firing the gun. The stock provides a means for the shooter to firmly support the device and easily aim it.

• stopping power: The ability of a firearm or other weapon to cause a penetrating ballistic injury to a target, human or animal, sufficient to incapacitate the target where it stands.

• stripper clip: A speedloader that holds several cartridges together in a single unit for easier loading of a firearm's magazine. A stripper clip is used only for loading the magazine and is not necessary for the firearm to function.

• suppressor, sound suppressor, sound moderator, "hush puppy",or silencer: A device attached to or part of the barrel of a firearm to reduce the amount of noise and flash generated by firing the weapon.

• silencer, suppressor, sound suppressor, sound moderator, or "hush puppy": A device attached to or part of the barrel of a firearm to reduce the amount of noise and flash generated by firing the weapon.

• swage: To reduce an item in size by forcing through a die. In internal ballistics, swaging refers to the process where bullets are swaged into the rifling of the barrel by the force of the expanding powder gases.

• swaged bullet: A bullet that is formed by forcing the bullet into a die to assume its final form.

• swaged choke: A constriction or choke in a shotgun barrel formed by a swaging process that compresses the outside of the barrel.

• swaged rifling: Rifling in a firearm barrel formed by a swaging process, such as button rifling.