A front end processor (FEP), or a communications processor, is a small-sized computer which interfaces to the host computer a number of networks, such as SNA, or a number of peripheral devices, such as terminals, disk units, printers and tape units. Data is transferred between the host computer and the front end processor using a high-speed parallel interface. The front end processor communicates with peripheral devices using slower serial interfaces, usually also through communication networks. The purpose is to off-load from the host computer the work of managing the peripheral devices, transmitting and receiving messages, packet assembly and disassembly, error detection, and error correction. Two examples are the IBM 3705 Communications Controller and the Burroughs Data Communications Processor.
Sometimes FEP is synonymous with a communications controller, although the latter is usually not as flexible. Early communications controllers such as the IBM 270x series were hard wired, but later units were programmable devices.
Front end processor is also used in a more general sense in asymmetric multi-processor systems. The FEP is a processing device (usually a computer) which is closer to the input source than is the main processor. It performs some task such as telemetry control, data collection, reduction of raw sensor data, analysis of keyboard input, etc.
Read more about Front End Processor: Communications FEPs in IP Era
Famous quotes containing the word front:
“Education is a necessity, it helps to understand life. Like that compagnero in Cuba who talked about politics, back when they were on strike. He knew many things, that hijo de puta, and he unraveled the most confusing situations in a marvelous way. You could see each point in front of you on the line of his reasoning like rinsed laundry set up to dry; he explained things to you so clearly that you could grasp it like a good hunk of bread with your hand.”
—Jacques Roumain (1907–1945)