Cyclecars - General Description

General Description

Cyclecars were propelled by single cylinder, V-twin or more rarely four cylinder engines, often air cooled. Sometimes these had been originally used in motorcycles and other components from this source such as gearboxes were also employed. Cyclecars were halfway between motorcycles and cars and were fitted with lightweight bodies, sometimes in a tandem two-seater configuration and could be primitive with minimal comfort and weather protection. They used various layouts and means of transmitting the engine power to the wheels, such as belt drive or chain drive often to one rear wheel only to avoid having to provide a differential.

The rise of cyclecars was a direct result of reduced taxation both for registration and annual licences of lightweight small engined cars. In France, for example, a car was classed for reduced rates if it weighed less than 350 kg (772 lb).

On 14 December 1912, at a meeting of the Federation Internationale des Clubs Moto Cycliste, it was formally decided that there should be an international classification of cyclecars to be accepted by the United Kingdom, Canada, United States, France, The Netherlands, Belgium, Italy, Austria and Germany. It was also decided to establish two classes of cyclecars, as follows;

• (i) Large class
  • Maximum weight 350 kg (772 lb)
  • Maximum engine capacity 1100 cc
  • Minimum tyre section 60 mm (2.4 in).
• (ii) Small class
  • Minimum weight 150 kg (331 lb)
  • Maximum weight 300 kg (661 lb)
  • Maximum engine capacity 750 cc
  • Minimum tyre section 55 mm (2.2 in).

All cyclecars were to have clutches and change-speed gears. This requirement could be fulfilled by even the simplest devices such as provision for slipping the belt on the pulley to act as a clutch, and varying of the pulley diameter to change the gear ratio.