Design and Development
In all models of this family of engines the cylinder heads are of aluminum alloy, screwed and shrunk onto steel barrels. Spark plug inserts and intake valve seats are made from aluminum-bronze alloy, while the exhaust valve seats are steel. The engines all employ hydraulic tappets which operate in aluminum guides that are machined into the crankcase. The tappets are built from four parts, a cam follower body, cup, cylinder and piston and operate with clearances of 0.03 in (1 mm) to 0.11 in (3 mm). The pushrods are steel and feature pressed-in ball ends.
Lubricating oil is delivered under pressure from the 4 US qt (4 L) oil sump to the drive bearings and the crankpins though the crankshaft. The cylinder walls and pistons are spray lubricated. Normal operating oil pressure is 35 psi, with minimum idle oil pressure 10 psi.
Read more about this topic: Continental O-170
Famous quotes containing the words design and/or development:
“Teaching is the perpetual end and office of all things. Teaching, instruction is the main design that shines through the sky and earth.”
—Ralph Waldo Emerson (1803–1882)
“Information about child development enhances parents’ capacity to respond appropriately to their children. Informed parents are better equipped to problem-solve, more confident of their decisions, and more likely to respond sensitively to their children’s developmental needs.”
—L. P. Wandersman (20th century)