Disinfection
Sodium hypochlorite solution, 3-6%, (common household bleach) must be diluted to be used safely when disinfecting surfaces and when used to treat drinking water. When disinfecting most surfaces, 1 part liquid household bleach to 100 parts water is sufficient for sanitizing. Stronger or weaker solutions may be more appropriate to meet specific goals, such as killing resistant viruses or sanitizing surfaces that will not be in contact with food. See references for more information.
In an emergency, drinking water should be treated by boiling for 1–3 minutes, longer at higher altitudes. If boiling is not possible, water can be chemically treated with a ratio of 2 drops of plain liquid household bleach (5-6% sodium hypochlorite solution) per liter of water or 8 drops of bleach per gallon (3.79L) of water; 1/2 teaspoon bleach per five gallons (19L) of water. Do not use powdered bleach, or bleach with scents, cleaners or other additives. Do not collect water for treatment from flood waters or other potentially contaminated sources. If water appears dirty or cloudy, let it settle and/or filter the water before adding the bleach. Let treated water stand covered for 30 minutes. If water is still cloudy after filtering, double the amount of bleach used. If the water is very cold, either warm it before treatment or double the treatment time. Treated water should still have a slight bleach odor after treatment. If it does not, repeat the treatment. If no bleach odor is evident after a second treatment, discard the water and find a better water source. Inappropriate dilutions of bleach can endanger your health.
Read more about this topic: Blanqueador