Video black level is defined as the level of brightness at the darkest (black) part of a visual image or the level of brightness at which no light is emitted from a screen, resulting in a pure black screen.
Video displays generally need to be calibrated so that the displayed black is true to the black information in the video signal. If the black level is not correctly adjusted, visual information in a video signal could be displayed as black, or black information could be displayed as above black information (gray).
The voltage of the black level varies across different television standards. PAL sets the black level the same as the blanking level, whilst NTSC sets the black level approximately 54 mv above the blanking level.
User misadjustment of black level on monitors is common. It results in darker colours having their hue changed, it affects contrast, and in many cases causes some of the image detail to be lost.
Black level is set by displaying a testcard image and adjusting display controls. With CRT displays:
- 'brightness' adjusts black level
- 'contrast' adjusts white level
- CRTs tend to have some interdependence of controls, so a control sometimes need adjustment more than once.
In Digital video black level usually means the range of RGB values in video signal, which can be either (typical of a computer output) or (standard for video).
Famous quotes containing the words black and/or level:
“A terrible, beetle-browed, mastiff-mouthed, yellow-skinned, broad-bottomed, grim-taciturn individual; with a pair of dull-cruel-looking black eyes, and as much Parliamentary intellect and silent-rage in him ... as I have ever seen in any man.”
—Thomas Carlyle (1795–1881)
“It may be well to remember that the highest level of moral aspiration recorded in history was reached by a few ancient Jews—Micah, Isaiah, and the rest—who took no count whatever of what might not happen to them after death. It is not obvious to me why the same point should not by and by be reached by the Gentiles.”
—Thomas Henry Huxley (1825–95)