Adelaide O-Bahn - Buses

Buses

The first buses to enter service on the O-Bahn were specially modified Mercedes-Benz O305 models. A fleet comprising 41 rigid and 51 articulated buses was purchased, their cost included in the original $98 million budget. The chassis were bought from Germany and heavily modified at the Mitsubishi Motors plant in Clovelly Park. The rigid buses had their power increased to 240 hp (180 kW) and the articulateds to 280 hp (210 kW); they were the first buses to travel at a speed of 100 km/h on suburban routes. Modified Scania and MAN buses were later introduced. All buses have ABS brakes and are able to stop within two bus lengths.

In the case of breakdowns, a specially designed vehicle nicknamed 'Dumbo' is used to tow buses from the O-Bahn. In the early stages of design it was intended that all buses would have towing ability; however, this was soundly rejected by the drivers' union and 'Dumbo' was purchased. If a bus tyre blows during a trip the guide-wheel prevents the bus from erratic movement, and a smaller aluminium inner tyre allows the bus to be driven to the nearest station at 40 km/h (25 mph).

The guide-wheel, which protrudes from the front sides and aligns with the track, is the most important part of the bus when travelling on the O-Bahn. Connected directly to the steering mechanism, it 'steers' the bus while on the track and prevents the main tyres from rubbing against the sides of the track. While it is not strictly necessary for drivers to hold the steering wheel when travelling on the O-Bahn because of the guide-wheel, safety procedures require the driver to be alert to their circumstances at all times. A rumble strip before stations is a reminder that they need to resume control. The guide-wheel is the most delicate part of the system and is designed to snap off upon sharp impact; before the O-Bahn was in place, a number of buses were fitted with guide-wheels for their ordinary routes to test their durability. Drivers were forced to be more cautious on their normal trips after numerous guide-wheel-to-kerb impacts.

Read more about this topic:  Adelaide O-Bahn