Wheelbuilding - Goals

Goals

The wheelwright will ensure that the wheel is true in two ways: lateral (sideways wobble) and radial (roundness/hop). The wheel also needs to be properly dished. The spokes will be tensioned equally, although the left and right sides of the rear wheel will differ (drive-side spokes require higher tension). Spokes should have no residual twist (windup) from tightening the nipples. The spokes may be "stress relieved", i.e. subjected to a greater tension during building than they are ever likely to encounter in use - usually by squeezing pairs of spokes together very hard. This 'yields' the spokes (and/or the hub) into a permanent shape where they bend around the hub flanges and each other.

Read more about this topic:  Wheelbuilding

Famous quotes containing the word goals:

    Despicable means used to achieve laudable goals renders the goals themselves despicable.
    Anton Pavlovich Chekhov (1860–1904)

    Artists have a double relationship towards nature: they are her master and her slave at the same time. They are her slave in so far as they must work with means of this world so as to be understood; her master in so far as they subject these means to their higher goals and make them subservient to them.
    Johann Wolfgang Von Goethe (1749–1832)

    If people would forget about utopia! When rationalism destroyed heaven and decided to set it up here on earth, that most terrible of all goals entered human ambition. It was clear there’d be no end to what people would be made to suffer for it.
    Nadine Gordimer (b. 1923)