What is molding?

  • (noun): A preliminary sculpture in wax or clay from which a finished work can be copied.
    Synonyms: modeling, modelling, moulding
    See also — Additional definitions below

Some articles on molding, moldings:

Cadillac De Ville Series - 1961–1964
... "skeg" trimmed with a thin three quarter length spear molding running from behind the front wheel opening to the rear of the car ... script was incorporated above the lower beltline molding near the rear of the body ... A De Ville script above the lower belt molding was continued as an identifier ...
Cadillac Series 70 - 1971–1976
... A horizontal beltline molding ran from behind the front wheel housing, almost to the rear stopping where an elliptical bulge in the body came to a point and where thin ... No rocker sill strips, panels or extension moldings were used ... Trim included bright body underscores with rear extensions horizontal thin belt moldings Fleetwood front fender lettering and laurel wreath badges for the hood and deck lid ...
Injection Molding - Process Troubleshooting - Molding Defects
... Injection molding is a complex technology with possible production problems ... They can be caused either by defects in the molds, or more often by the molding process itself ... Molding Defects Alternative name Descriptions Causes Blister Blistering Raised or layered zone on surface of the part Tool or material is too hot, often caused by a lack of cooling around the tool or a ...
Cadillac Series 62 - 1954–1956
... Sedans used a distinctive style of window reveal molding, which created a built in sun visor effect ... luxury hardtop, which also had wider sill moldings ... On the sides of the body the rub-rail moldings formed a right angle with the vertical trim on the rear doors or fenders ...
Keyboard Keys - Technology - Key Switches
... electronic keyboards, the key legends were produced by two-shot (or double-shot, or two-color) molding, where either the key shell or the inside of the key ... This was possible because of molding techniques that could provide very tight tolerances for the switch-plunger holes and guides across the width of the keyboard so that the key plunger-to-housing ... However, as plastic molding advanced in maintaining tight tolerances, and as key travel length reduced from 0.187-inch to 0.110-inch (4.75 mm to 2.79 mm), single-part keytop/plung ...

More definitions of "molding":

  • (noun): A decorative recessed or relieved surface on an edge.
    Synonyms: moulding, border
  • (noun): The act of creating something by casting it in a mold.
    Synonyms: casting
  • (noun): A decorative strip used for ornamentation or finishing.
    Synonyms: moulding

Famous quotes containing the word molding:

    To translate, one must have a style of his own, for otherwise the translation will have no rhythm or nuance, which come from the process of artistically thinking through and molding the sentences; they cannot be reconstituted by piecemeal imitation. The problem of translation is to retreat to a simpler tenor of one’s own style and creatively adjust this to one’s author.
    Paul Goodman (1911–1972)