Blow molding ( BrE moulding ) is a manufacturing process by which hollow plastic parts are formed. In general, there are three main types of blow molding: extrusion blow molding, injection blow molding, and stretch blow molding. The blow molding process begins with melting down the plastic and forming it into a parison or preform. The parison is a tube-like piece of plastic with a hole in one end in which compressed air can pass through.
Read more about Blow Molding.
Some articles on blow molding:
... Containers such as jars often have an excess of material due to the molding process ... plastic is then recycled to create new moldings ... For example, moldings produced from amorphous materials are much more difficult to trim than crystalline materials ...
... For example, in extrusion blow molding it is common to use punching dies to remove tails, molding flash (scrap plastic) and handle slugs from bottles or other molded containers ... in the machines, and finished containers leave the blow molding machine ... Other blow molding equipment, such as rotary wheel machinery, requires the use of downstream trimming ...
... Rotational molding offers design advantages over other molding processes ... In some cases rotational molding can be used as a feasible alternative to blow molding, this is due to the similarity in product outputs, with products such as plastic bottles and cylindrical containers, this ... and put into production much more quickly than other molding processes ...
Famous quotes containing the words molding and/or blow:
“To translate, one must have a style of his own, for otherwise the translation will have no rhythm or nuance, which come from the process of artistically thinking through and molding the sentences; they cannot be reconstituted by piecemeal imitation. The problem of translation is to retreat to a simpler tenor of ones own style and creatively adjust this to ones author.”
—Paul Goodman (19111972)
“Where force is necessary, there it must be applied boldly, decisively and completely. But one must know the limitations of force; one must know when to blend force with a manoeuver, a blow with an agreement.”
—Leon Trotsky (18791940)