Frame
A truck frame consists of two parallel boxed (tubular) or C‑shaped rails, or beams, held together by crossmembers. These frames are referred to as ladder frames due to their resemblance to a ladder if tipped on end. The rails consist of a tall vertical section (two if boxed) and two shorter horizontal flanges. The height of the vertical section provides opposition to vertical flex when weight is applied to the top of the frame (beam resistance). Though typically flat the whole length on heavy duty trucks, the rails may sometimes be tapered or arched for clearance around the engine or over the axles. The holes in rails are used either for mounting vehicle components and running wires and hoses, or measuring and adjusting the orientation of the rails at the factory or repair shop.
The frame is almost always made of steel, but can be made (whole or in part) of aluminium for a lighter weight. A tow bar may be found attached at one or both ends, but heavy trucks almost always make use of a fifth wheel hitch.
Read more about this topic: Truck, Anatomy of A Truck
Famous quotes containing the word frame:
“From Harmony, from heavenly Harmony
This universal Frame began:
From Harmony to Harmony
Through all the Compass of the Notes it ran,
The Diapason closing full in Man.”
—John Dryden (1631–1700)
“It would be nice to travel if you knew where you were going and where you would live at the end or do we ever know, do we ever live where we live, we’re always in other places, lost, like sheep.”
—Janet Frame (b. 1924)
“Whenever the society is dissolved, it is certain the government of that society cannot remain ... that being as impossible, as for the frame of a house to subsist when the materials of it are scattered and dissipated by a whirlwind, or jumbled into a confused heap by an earthquake.”
—John Locke (1632–1704)