Transmission Voie-Machine - Background - Implementation

Implementation

The line is divided into signal blocks of about 1,500 metres (~1 mi), the boundaries of which are marked by blue boards printed with a yellow triangle. Dashboard instruments show the maximum permitted speed for a train's current block, as well as a target speed based on the profile of the line ahead. The maximum permitted speed is based on factors such as the proximity of trains ahead (with steadily decreasing maximum permitted speeds in blocks closer to the rear of the next train), junction placement, speed restrictions, the top speed of the train and distance from the end of LGV route. Trains at high-speed take several kilometres to stop. Since trains will require more than one signal block to slow down, drivers are alerted to reduce speed gradually, several blocks before any required stop.

The signalling system is permissive; the driver of a train is permitted to proceed into an occupied block section without first obtaining authorisation. Speed in this situation is limited to 30 kilometres per hour (19 mph) and if speed exceeds 35 km/h (22 mph), the emergency brake is applied and the train stops. If the board marking the entrance to the block section is accompanied by a sign marked Nf, the block section is not permissive, and the driver must obtain authorisation from the Signalling and Control Centre (Poste d'Aiguillage et de Régulation) before entering the block. Once a route is set, or the signalling centre has provided authorisation, a white lamp below the marker board is lit to inform the driver. The driver then acknowledges the authorization using a button on the train's control panel. This temporarily overrides the emergency braking system, which would otherwise stop the train when proceeding past the non-permissive marker's ground loop.

When trains enter or leave the LGV from lignes classiques, they pass over a ground loop which automatically switches the driver's dashboard indicators to the appropriate signalling system. For example, a train leaving the LGV onto a French ligne classique would have its TVM signalling system deactivated and its traditional KVB (Contrôle Vitesse par Balise, English: beacon speed control) system enabled.