Hardware
The Triple X was based on an 8 MHz 68010 CPU, with a Hitachi 6303 "service processor". The CPU was accompanied by a 68451 memory management unit and a 68450 DMA controller. Both VMEbus and a BBC Micro-compatible "1MHz bus" expansion buses were provided, as was a SCSI host adapter, and an optional Ethernet interface. Both RS-423 and X.25-compatible synchronous serial ports were provided. This latter feature made the Triple X attractive to the UK academic community, where X.25 networks were prevalent at the time.
Standard RAM capacity was 1 MB, expandable to 7 MB via VME cards. A 720 kB, 5.25 in floppy disk drive and ST506-comaptible 20 MB hard disk were fitted as standard, interfaced to the SCSI bus via an OMTI adapter.
Either a 10 or 13 inch colour monitor was supplied. Two graphics modes were available: 720 × 256 pixels in four colours, or 720 × 512 in two colours.
The Triple X had novel touch-sensitive "soft" power switch. When switching off, this commanded the operating system to shutdown gracefully before powering down.
Read more about this topic: Torch Triple X
Famous quotes containing the word hardware:
“A friend of mine spoke of books that are dedicated like this: “To my wife, by whose helpful criticism ...” and so on. He said the dedication should really read: “To my wife. If it had not been for her continual criticism and persistent nagging doubt as to my ability, this book would have appeared in Harper’s instead of The Hardware Age.””
—Brenda Ueland (1891–1985)