Class of Construction
Electrical appliance classes are differentiated by a series of IEC protection classes. The protocols for PAT Testing vary by appliance class.
- Class I – Single insulated wiring, which requires an earth connection. There is no symbol for a Class I product so if a rating plate has no symbol on it then it is usually Class I.
- Class II – Double insulated wiring, The earth clamp is still connected during the insulation test even though no earth on appliance. Class II is indicated by double box.
- Class III – These are appliances that are supplied at a low voltage (usually called Separated Extra Low Voltage) which must be less than 50 V. These appliances are supplied with a transformer supply that is also marked.
The earth lead is connected to metal parts on both Class I and Class II appliances. For "Class I" during the earth test to prove continuity between earth pin and metal parts on the appliance. For "Class II" during the insulation test to prove the insulation between active-neutral and the metal parts of the appliance. ie there is no leakage from mains coming into the appliance to the metal parts that are exposed.
Read more about this topic: Test And Tagging
Famous quotes containing the words class and/or construction:
“He could jazz up the map-reading class by having a full-size color photograph of Betty Grable in a bathing suit, with a co- ordinate grid system laid over it. The instructor could point to different parts of her and say, “Give me the co-ordinates.”... The Major could see every unit in the Army using his idea.... Hot dog!”
—Norman Mailer (b. 1923)
“When the leaders choose to make themselves bidders at an auction of popularity, their talents, in the construction of the state, will be of no service. They will become flatterers instead of legislators; the instruments, not the guides, of the people.”
—Edmund Burke (1729–1797)