Other Types of Stern
The reverse stern, reverse transom stern, sugar-scoop, or retroussé stern is a kind of transom stern that is raked backwards (common on modern yachts, rare on vessels before the 20th century); the vertical transom stern or plumb stern is raked neither forward nor back, but falls directly from the taffrail down to the wing transom. The rocket ship stern is a term for an extremely angled retroussé stern. A double ended ship with a very narrow square counter formed from the bulwarks or upper deck above the head of the rudder is said to have a pink stern or pinky stern. The torpedo stern or torpedo-boat stern describes a kind of stern with a low rounded shape that is nearly flat at the waterline, but which then slopes upward in a conical fashion towards the deck (practical for small high-speed power boats with very shallow drafts).
A Constanzi stern is a type of stern designed for use on ocean-going vessels. It is a compromise between the 'spoon-shaped' stern usually found on ocean liners, and the flat transom, often required for fitting azimuth thrusters. The design allows for improved seagoing characteristics. It is the stern design on Queen Mary 2, and was originally proposed for SS Oceanic and Eugenio C, both constructed in the 1960s. It is arguably one of the least aesthetically pleasing of stern designs. A lute stern is to be found on inshore craft on the Sussex, England shore. It comprises a watertight transom with the topside planking extended aft to form a non watertight counter which is boarded across the fashion timbers curving out aft from the transom. Some working boats and modern replicas have a similar form of counter, built to be water tight as described in the "transom stern" section above. These are being confused with lute sterns but as a lute is not watertight, a better term is needed. Chappelle in American Small Sailing Craft refers to a Bermudan boat with this form of counter, using the term Square Tuck Stern to describe it. The term tuck is used in the NW of England for this area of the hull at the sternpost, and for the bulkhead across the counter if one is fitted.
A bustle stern refers to any kind of stern (transom, elliptical, etc.) that has a large "bustle" or blister at the waterline below the stern to prevent the stern from "squatting" when getting underway. It only appears in sailboats, never in power-driven craft.
Read more about this topic: Stern
Famous quotes containing the words types and/or stern:
“Science is intimately integrated with the whole social structure and cultural tradition. They mutually support one other—only in certain types of society can science flourish, and conversely without a continuous and healthy development and application of science such a society cannot function properly.”
—Talcott Parsons (1902–1979)
“As a people, we have the problem of making our forests outlast this generation, or iron outlast this century, and our coal the next; not merely as a matter of convenience or comfort, but as a matter of stern necessity.”
—William Howard Taft (1857–1930)