Steam Whistle - Types of Whistles

Types of Whistles

• Plain whistle – an inverted cup mounted on a stem, as in the illustration above. In Europe, railway steam whistles were typically loud, shrill, single-note plain whistles. In the UK, locomotives were usually fitted with only one or two of these whistles, the latter having different tones and being controlled individually to allow more complex signalling. On railroads in Finland, two single-note whistles were used on every engine; one shrill, one of a lower tone. They were used for different signaling purposes. The Deutsche Reichsbahn of Germany introduced another whistle design in the 1920s called "Einheitspfeife", conceived as a single-note plain whistle which already had a very deep-pitched and loud sound, but if the whistle trigger is just pulled down half of its way an even lower tone like from a chime-whistle could also be caused. This whistle is the reason for the typical "long high - short low - short high" signal sound of steam locomotives in Germany.

• Chime whistle – two or more resonant bells or chambers that sound simultaneously. In America, railway steam whistles were typically compact chime whistles with more than one whistle contained within, creating a chord. In Australia the New South Wales Government Railways after the 1924 re-classification many steam locomotives either had 5 chimes whistles fitted (this include many locomotives from the pre 1924 re-classification, or were built new with 5 chime whistles. 3-chimes (3 compact whistles within one) were very popular, as well as 5-chimes, and 6-chimes. In some cases chime whistles were used in Europe. Ships such as the Titanic were equipped with chimes consisting of three separate whistles (in the case of the Titanic the whistles measured 9, 12, and 15 inches diameter). The Japanese National Railways used a chime whistle that sounds like a very deep single-note plain whistle, because the chords where just accessed in a simple parallel circuit if the whistle trigger is pulled down.

• Organ whistle – a whistle with mouths cut in the side, usually a long whistle in relation to diameter, hence the name. These whistle were very common on steamships, especially those manufactured in the UK.

• Gong – two whistles facing in opposite directions on a common axis. These were popular as factory whistles. Some were composed of three whistle chimes.

• Variable pitch whistle – a whistle containing an internal piston available for changing pitch. This whistle type could be made to sound like a siren or to play a melody. Often called a fire alarm whistle, wildcat whistle, or mocking bird whistle.

• Toroidal or Levavasseur whistle – a whistle with a torus-shaped (doughnut-shaped) resonant cavity paralleling the annular gas orifice, named after Robert Levavasseur, its inventor. Unlike a conventional whistle, the diameter (and sound level) of a ring-shaped whistle can be increased without altering resonance chamber cross-sectional area (preserving frequency), allowing construction of a very large diameter high frequency whistle. The frequency of a conventional whistle declines as diameter is increased. Other ring-shaped whistles include the Hall-Teichmann whistle, Ultrawhistle, and Dynawhistle.

• Helmholtz whistle – a whistle with a cross-sectional area exceeding that of the whistle bell opening, often shaped like a bottle or incandescent light bulb. The frequency of this whistle relative to its size is lower than that of a conventional whistle and therefore these whistles have found application in small gauge steam locomotives. Also termed a Bangham whistle.