Pump Specific Speed
Low-specific speed radial flow impellers develop hydraulic head principally through centrifugal force. Pumps of higher specific speeds develop head partly by centrifugal force and partly by axial force. An axial flow or propeller pump with a specific speed of 10,000 or greater generates its head exclusively through axial forces. Radial impellers are generally low flow/high head designs whereas axial flow impellers are high flow/low head designs.
Centrifugal pump impellers have specific speed values ranging from 500 to 10,000 (English units), with radial flow pumps at 500-4000, mixed flow at 2000-8000 and axial flow pumps at 7000-20,000. Values of specific speed less than 500 are associated with positive displacement pumps.
As the specific speed increases, the ratio of the impeller outlet diameter to the inlet or eye diameter decreases. This ratio becomes 1.0 for a true axial flow impeller.
where:
- is specific speed (unitless)
- is pump rotational speed (radians per second)
- is flowrate (m³/s) at the point of best efficiency
- is total head (m) per stage at the point of best efficiency
- is acceleration due to gravity (m/s²)
Note that the units used affect the specific speed value and consistent units should be used for comparisons. Pump specific speed can be calculated using British gallons or using Metric units (m3/s or L/s and metres head), changing the values listed above.
Read more about this topic: Specific Speed
Famous quotes containing the words pump, specific and/or speed:
“Vivacity, leadership, must be had, and we are not allowed to be nice in choosing. We must fetch the pump with dirty water, if clean cannot be had.”
—Ralph Waldo Emerson (1803–1882)
“Patriotism is proud of a country’s virtues and eager to correct its deficiencies; it also acknowledges the legitimate patriotism of other countries, with their own specific virtues. The pride of nationalism, however, trumpets its country’s virtues and denies its deficiencies, while it is contemptuous toward the virtues of other countries. It wants to be, and proclaims itself to be, “the greatest,” but greatness is not required of a country; only goodness is.”
—Sydney J. Harris (1917–1986)
“The correct rate of speed in innovating changes in long-standing social customs has not yet been determined by even the most expert of the experts. Personally I am beginning to think there is more danger in lagging than in speeding up cultural change to keep pace with mechanical change.”
—Mary Barnett Gilson (1877–?)