SPARC - Features

Features

The SPARC architecture was heavily influenced by the earlier RISC designs including the RISC I and II from the University of California, Berkeley and the IBM 801. These original RISC designs were minimalist, including as few features or op-codes as possible and aiming to execute instructions at a rate of almost one instruction per clock cycle. This made them similar to the MIPS architecture in many ways, including the lack of instructions such as multiply or divide. Another feature of SPARC influenced by this early RISC movement is the branch delay slot.

The SPARC processor usually contains as many as 160 general purpose registers. At any point, only 32 of them are immediately visible to software - 8 are a set of global registers (one of which, g0, is hard-wired to zero, so only 7 of them are usable as registers) and the other 24 are from the stack of registers. These 24 registers form what is called a register window, and at function call/return, this window is moved up and down the register stack. Each window has 8 local registers and shares 8 registers with each of the adjacent windows. The shared registers are used for passing function parameters and returning values, and the local registers are used for retaining local values across function calls.

The "Scalable" in SPARC comes from the fact that the SPARC specification allows implementations to scale from embedded processors up through large server processors, all sharing the same core (non-privileged) instruction set. One of the architectural parameters that can scale is the number of implemented register windows; the specification allows from 3 to 32 windows to be implemented, so the implementation can choose to implement all 32 to provide maximum call stack efficiency, or to implement only 3 to reduce context switching time, or to implement some number between them. Other architectures that include similar register file features include Intel i960, IA-64, and AMD 29000.

The architecture has gone through several revisions. It gained hardware multiply and divide functionality in Version 8. 64-bit (addressing and data) were added to the version 9 SPARC specification published in 1994.

In SPARC Version 8, the floating point register file has 16 double precision registers. Each of them can be used as two single precision registers, providing a total of 32 single precision registers. An odd-even number pair of double precision registers can be used as a quad precision register, thus allowing 8 quad precision registers. SPARC Version 9 added 16 more double precision registers (which can also be accessed as 8 quad precision registers), but these additional registers can not be accessed as single precision registers.

Tagged add and subtract instructions perform adds and subtracts on values assuming that the bottom two bits do not participate in the computation. This can be useful in the implementation of the run time for ML, Lisp, and similar languages that might use a tagged integer format.

The endianness of the 32-bit SPARC V8 architecture is purely big-endian. The 64-bit SPARC V9 architecture uses big-endian instructions, but can access data in either big-endian or little-endian byte order, chosen either at the application instruction (load/store) level or at the memory page level (via an MMU setting). The latter is often used for accessing data from inherently little-endian devices, such as those on PCI buses.