SMS Rostock - Construction

Construction

Rostock was ordered under the contract name "Ersatz Geier" and was laid down at the Howaldtswerke shipyard in Kiel in 1911. She was launched on 12 November 1912; at her launching, she was christened by the mayor of Rostock, Dr. Magnus Maßmann. After completing Fitting-out work, the ship was commissioned into the High Seas Fleet on 5 February 1914. The ship was 142.2 meters (467 ft) long overall and had a beam of 13.7 m (45 ft) and a draft of 5.38 m (17.7 ft) forward. She displaced 6,191 t (6,093 long tons; 6,824 short tons) at full combat load. Her propulsion system consisted of two sets of Marine steam turbines driving two 3.5-meter (11 ft) propellers. They were designed to give 26,000 shaft horsepower (19,000 kW), but reached 43,628 shp (32,533 kW) in service. These were powered by twelve coal-fired Marine-type water-tube boilers and two oil-fired double-ended boilers. These gave the ship a top speed of 29.3 knots (54.3 km/h; 33.7 mph). Rostock carried 1,300 tonnes (1,300 long tons) of coal, and an additional 200 tonnes (200 long tons) of oil that gave her a range of approximately 5,000 nautical miles (9,300 km; 5,800 mi) at 12 knots (22 km/h; 14 mph). Rostock had a crew of 18 officers and 355 enlisted men.

The ship was armed with twelve 10.5 cm SK L/45 guns in single pedestal mounts. Two were placed side by side forward on the forecastle, eight were located amidships, four on either side, and two were side by side aft. The guns had a maximum elevation of 30 degrees, which allowed them to engage targets out to 12,700 m (41,700 ft). They were supplied with 1,800 rounds of ammunition, for 150 shells per gun. She was also equipped with a pair of 50 cm (19.7 in) torpedo tubes with five torpedoes submerged in the hull on the broadside. She also could also carry 120 mines. The ship was protected by a waterline armored belt that was 60 mm (2.4 in) thick amidships. The conning tower had 100 mm (3.9 in) thick sides, and the deck was covered with up to 60 mm thick armor plate.