Light Aircraft
Light aircraft have airframes primarily of all-aluminum semi-monocoque construction, however, a few light planes have tubular truss load-carrying construction with fabric or aluminum skin, or both. Aluminum skin is normally of the minimum practical thickness: 0.015 to 0.025 in. Although design strength requirements are relatively low, the skin needs moderately high yield strength and hardness to minimize ground damage from stones, debris, mechanics’ tools, and general handling. Other primary factors involved in selecting an alloy for this application are corrosion resistance, cost, and appearance. Alloys 6061-T6 and alclad 2024-T3 are the primary choices.
Skin sheet on light airplanes of recent design and construction generally is alclad 2024-T3. The internal structure comprises stringers, spars, bulkheads, chord members, and various attaching fittings made of aluminum extrusions, formed sheet, forgings, and castings.
The alloys most used for extruded members are 2024-T4 for sections less than 0.125 in. thick and for general application, and 2014-T6 for thicker, more highly stressed sections. Alloy 6061-T6 has considerable application for extrusions requiring thin sections and excellent corrosion resistance. Alloy 2014-T6 is the primary forging alloy, especially for landing gear and hydraulic cylinders. Alloy 6061-T6 and its forging counterpart 6151-T6 often are utilized in miscellaneous fittings for reasons of economy and increased corrosion performance, when the parts are not highly stressed.
Alloys 356-T6 and A356-T6 are the primary casting alloys employed for brackets, bellcranks, pulleys, and various fittings. Wheels are produced in these alloys as permanent mold or sand castings. Die castings in alloy A380 also are satisfactory for wheels for light aircraft.
For low-stressed structure in light aircraft, alloys 3003-H12, H14, and H16; 5052-O, H32, H34, and H36; and 6061-T4 and T6 are sometimes employed. These alloys are also primary selections for fuel, lubricating oil, and hydraulic oil tanks, piping, and instrument tubing and brackets, especially where welding is required. Alloys 3003, 6061, and 6951 are utilized extensively in brazed heat exchangers and hydraulic accessories. Recently developed alloys, such as 5086, 5454, 5456, 6070, and the new weldable aluminum-magnesium-zinc alloys, offer strength advantages over those previously mentioned.
Sheet assembly of light aircraft is accomplished predominantly with rivets of alloys 2017-T4, 2117-T4, or 2024-T4. Self-tapping sheet metal screws are available in aluminum alloys, but cadmium-plated steel screws are employed more commonly to obtain higher shear strength and driveability. Alloy 2024-T4 with an anodic coating is standard for aluminum screws, bolts, and nuts made to military specifications. Alloy 6262-T9, however, is superior for nuts, because of its virtual immunity to stress-corrosion cracking.
Read more about this topic: Skin (aircraft)
Famous quotes containing the word light:
“Separated lovers cheat absence by a thousand fancies which have their own reality. They are prevented from seeing one another and they cannot write; nevertheless they find countless mysterious ways of corresponding, by sending each other the song of birds, the scent of flowers, the laughter of children, the light of the sun, the sighing of the wind, and the gleam of the stars—all the beauties of creation.”
—Victor Hugo (1802–1885)