Bituminous surface treatment (BST) is used mainly on low-traffic roads, but also as a sealing coat to rejuvenate an asphalt concrete pavement. It generally consists of aggregate spread over a sprayed-on asphalt emulsion or cut-back asphalt cement. The aggregate is then embedded into the asphalt by rolling it, typically with a rubber-tired roller. BSTs of this type are described by a wide variety of regional terms including "chip seal", "tar and chip", "oil and stone", "seal coat", "sprayed seal" or "surface dressing".
BST is used on hundreds of miles of the Alaska Highway and other similar roadways in Alaska, the Yukon Territory, and northern British Columbia. The ease of application of BST is one reason for its popularity, but another is its flexibility, which is important when roadways are laid down over unstable terrain that thaws and softens in the spring.
Other types of BSTs include micropaving, slurry seals and Novachip. These are laid down using specialized and proprietary equipment. They are most often used in urban areas where the roughness and loose stone associated with chip seals is considered undesirable.
Read more about this topic: Road Surface
Famous quotes containing the words surface and/or treatment:
“The surface of the earth is soft and impressible by the feet of men; and so with the paths which the mind travels. How worn and dusty, then, must be the highways of the world, how deep the ruts of tradition and conformity!”
—Henry David Thoreau (1817–1862)
“James’s great gift, of course, was his ability to tell a plot in shimmering detail with such delicacy of treatment and such fine aloofness—that is, reluctance to engage in any direct grappling with what, in the play or story, had actually “taken place”Mthat his listeners often did not, in the end, know what had, to put it in another way, “gone on.””
—James Thurber (1894–1961)