Road Surface - Asphalt

Asphalt

Asphalt (specifically, asphalt concrete) has been widely used since the 1920s. The viscous nature of the bitumen binder allows asphalt concrete to sustain significant plastic deformation, although fatigue from repeated loading over time is the most common failure mechanism. Most asphalt surfaces are laid on a gravel base, which is generally at least as thick as the asphalt layer, although some 'full depth' asphalt surfaces are laid directly on the native subgrade. In areas with very soft or expansive subgrades such as clay or peat, thick gravel bases or stabilization of the subgrade with Portland cement or lime may be required. Polypropylene and polyester geosynthetics have also been used for this purpose and in some northern countries, a layer of polystyrene boards have been used to delay and minimize frost penetration into the subgrade.

Depending on the temperature at which it is applied, asphalt is categorized as hot mix asphalt (HMA), warm mix asphalt, or cold mix asphalt. Hot mix asphalt is applied at temperatures over 300°F (150°C) with a free floating screed. Warm mix asphalt is applied at temperatures of 200–250°F (95–120°C), resulting in reduced energy usage and emissions of volatile organic compounds. Cold mix asphalt is often used on lower volume rural roads, where hot mix asphalt would cool too much on the long trip from the asphalt plant to the construction site.

An asphalt concrete surface will generally be constructed for high volume primary highways having an Average Annual Daily Traffic load higher than 1200 vehicles per day. Advantages of asphalt roadways include relatively low noise, relatively low cost compared with other paving methods, and perceived ease of repair. Disadvantages include less durability than other paving methods, less tensile strength than concrete, the tendency to become slick and soft in hot weather and a certain amount of hydrocarbon pollution to soil and groundwater or waterways.

In the 1960s, rubberized asphalt was used for the first time, mixing crumb rubber from used tires with asphalt. In addition to using tires that would otherwise fill landfills and present a fire hazard, rubberized asphalt is more durable and provides a 7–12 dB noise reduction over conventional asphalt. However, application of rubberized asphalt is more temperature-sensitive, and in many locations can only be applied at certain times of the year.

Read more about this topic:  Road Surface

Famous quotes containing the word asphalt:

    And the wind shall say “Here were decent godless people;
    Their only monument the asphalt road
    And a thousand lost golf balls.”
    —T.S. (Thomas Stearns)

    And the wind shall say: “Here were decent godless people:
    Their only monument the asphalt road
    And a thousand lost golf balls.”
    —T.S. (Thomas Stearns)