Peak Loss
An aspect of most rectification is a loss from the peak input voltage to the peak output voltage, caused by the built-in voltage drop across the diodes (around 0.7 V for ordinary silicon p–n junction diodes and 0.3 V for Schottky diodes). Half-wave rectification and full-wave rectification using a center-tapped secondary will have a peak voltage loss of one diode drop. Bridge rectification will have a loss of two diode drops. This reduces output voltage, and limits the available output voltage if a very low alternating voltage must be rectified. As the diodes do not conduct below this voltage, the circuit only passes current through for a portion of each half-cycle, causing short segments of zero voltage (where instantaneous input voltage is below one or two diode drops) to appear between each "hump".
Peak loss is very important for low voltage rectifiers (for example, 12 V or less) but is insignificant in high-voltage applications such as HVDC.
Read more about this topic: Rectifier
Famous quotes containing the words peak and/or loss:
“Sleep shall neither night nor day
Hang upon his penthouse lid;
He shall live a man forbid;
Weary sev’n-nights, nine times nine,
Shall he dwindle, peak and pine;
Though his bark cannot be lost,
Yet it shall be tempest-tossed.”
—William Shakespeare (1564–1616)
“And what greater calamity can fall upon a nation than the loss of worship? Then all things go to decay. Genius leaves the temple to haunt the senate or the market.”
—Ralph Waldo Emerson (1803–1882)