Rawmill - Dry Rawmills

Dry Rawmills

Dry rawmills are the normal technology installed today, allowing minimization of energy consumption and CO₂ emissions. In general, cement raw materials are mainly quarried, and so contain a certain amount of natural moisture. Attempting to grind a wet material is unsuccessful because an intractable "mud" forms. On the other hand, it is much easier to dry a fine material than a coarse one, because large particles hold moisture deep in their structure. It is therefore usual to simultaneously dry and grind the materials in the rawmill. A hot-air furnace may be used to supply this heat, but usually hot waste gases from the kiln are used. For this reason, the rawmill is usually placed close to the kiln preheater. Types of dry rawmill include ball mills, roller mills and hammer mills.