An SS7 point code is similar to an IP address in an IP network. It is a unique address for a node (Signaling Point, or SP), used in MTP layer 3 to identify the destination of a message signal unit (MSU).
In such a message you will find an OPC (Originating Point Code) and a DPC (Destination Point Code); sometimes documents also refer to it as a signaling point code. Depending on the network, a point code can be 24 bits (North America, China), 16 bits (Japan), or 14 bits (ITU standard, International SS7 network and most countries) in length.
ANSI point codes use 24 bits, mostly in 8-8-8 format. ITU point codes use 14 bits and are written in 3-8-3 format.
Fourteen bit point codes can be written in a number of formats. The most common formats are decimal number, hexadecimal number, or 3-8-3 format (3 most significant bits, 8 middle bits, 3 least significant bits).
Twenty-four bit point codes are written in one of decimal, hexadecimal, or 8-8-8 format.
Read more about Point Code: Abbreviations
Famous quotes containing the words point and/or code:
“There is a point at which methods devour themselves.”
—Frantz Fanon (19251961)
“Hollywood keeps before its child audiences a string of glorified young heroes, everyone of whom is an unhesitating and violent Anarchist. His one answer to everything that annoys him or disparages his country or his parents or his young lady or his personal code of manly conduct is to give the offender a sock in the jaw.... My observation leads me to believe that it is not the virtuous people who are good at socking jaws.”
—George Bernard Shaw (18561950)