Paper - Types, Thickness and Weight

Types, Thickness and Weight

Main articles: Paper size and Paper density

The thickness of paper is often measured by caliper, which is typically given in thousandths of an inch. Paper may be between 0.07 millimetres (0.0028 in) and 0.18 millimetres (0.0071 in) thick.

Paper is often characterized by weight. In the United States, the weight assigned to a paper is the weight of a ream, 500 sheets, of varying "basic sizes", before the paper is cut into the size it is sold to end customers. For example, a ream of 20 lb, 8.5 in × 11 in (216 mm × 279 mm) paper weighs 5 pounds, because it has been cut from a larger sheet into four pieces. In the United States, printing paper is generally 20 lb, 24 lb, or 32 lb at most. Cover stock is generally 68 lb, and 110 lb or more is considered card stock.

In Europe, and other regions using the ISO 216 paper sizing system, the weight is expressed in grammes per square metre (g/m2 or usually just g) of the paper. Printing paper is generally between 60 g and 120 g. Anything heavier than 160 g is considered card. The weight of a ream therefore depends on the dimensions of the paper and its thickness.

Most commercial paper sold in North America is cut to standard paper sizes based on customary units and is defined by the length and width of a sheet of paper.

The ISO 216 system used in most other countries is based on the surface area of a sheet of paper, not on a sheet's width and length. It was first adopted in Germany in 1922 and generally spread as nations adopted the metric system. The largest standard size paper is A0 (A zero), measuring one square meter (approx. 1189x841 mm). Two sheets of A1, placed upright side by side fit exactly into one sheet of A0 laid on its side. Similarly, two sheets of A2 fit into one sheet of A1 and so forth. Common sizes used in the office and the home are A4 and A3 (A3 is the size of two A4 sheets).

The density of paper ranges from 250 kg/m3 (16 lb/cu ft) for tissue paper to 1,500 kg/m3 (94 lb/cu ft) for some speciality paper. Printing paper is about 800 kg/m3 (50 lb/cu ft).

Paper may be classified into seven categories:

• Printing papers of wide variety.
• Wrapping papers for the protection of goods and merchandise. This includes wax and kraft papers.
• Writing paper suitable for stationary requirements. This includes ledger, bank, and bond paper.
• Blotting papers containing little or no size.
• Drawing papers usually with rough surfaces used by artists and designers, including cartridge paper.
• Handmade papers including most decorative papers, Ingres papers, Japanese paper and tissues, all characterized by lack of grain direction.
• Specialty papers including cigarette paper, toilet tissue, and other industrial papers.

Some paper types include:

Bank paper Banana paper Bond paper Book paper Coated paper: glossy and matte surface Construction paper/sugar paper Cotton paper Electronic paper

Fish paper (vulcanized fibres for electrical insulation) Inkjet paper Kraft paper Laid paper Leather paper Mummy paper Sandpaper

Tyvek paper Wallpaper Washi Waterproof paper Wax paper Wove paper Xuan paper