Chaining Stations
Each specific location along a line is known as a chaining station, and is identified by a number unique to that chaining line. The precision of the location depends on its usage. On engineering maps, the location of such features as curves, switches, crossings, stations and platforms are ordinarily specified to a precision of one foot (30 cm). This is expressed as ; a chaining station located 1,470 feet from chaining zero would be described as 14+70. For greater precision, or where style or protocol requires it, unit of less than a foot may be described. The Brooklyn Rapid Transit Company used without trailing zeros: thus a map location designated as P.S. 14+70.25 would indicate that the Point of a Switch at that location is 1,470 and one quarter feet (1,470 feet and 3 inches) from chaining zero.
Signals are identified by the chaining line and track number, and by the nearest 100-foot chaining station. In this usage only the number of 100-foot chains from chaining zero are displayed. Thus, a signal on the BMT with a designation of A2 / 102 would be on the BMT chaining line A, track 2, within 50 feet of the chaining station at 10,200 feet from chaining zero.
Read more about this topic: New York City Subway Chaining
Famous quotes containing the word stations:
“A reader who quarrels with postulates, who dislikes Hamlet because he does not believe that there are ghosts or that people speak in pentameters, clearly has no business in literature. He cannot distinguish fiction from fact, and belongs in the same category as the people who send cheques to radio stations for the relief of suffering heroines in soap operas.”
—Northrop Frye (b. 1912)