Memory-mapped I/O - Example

Example

Consider a simple system built around an 8-bit microprocessor. Such a CPU might provide 16-bit address lines, allowing it to address up to 64 kibibytes (KiB) of memory. On such a system, perhaps the first 32 KiB of address space would be allotted to random access memory (RAM), another 16K to read only memory (ROM) and the remainder to a variety of other devices such as timers, counters, video display chips, sound generating devices, and so forth. The hardware of the system is arranged so that devices on the address bus will only respond to particular addresses which are intended for them; all other addresses are ignored. This is the job of the address decoding circuitry, and it is this that establishes the memory map of the system.

Thus we might end up with a memory map like so:

Note that this memory map contains gaps; that is also quite common.

Assuming the fourth register of the video controller sets the background colour of the screen, the CPU can set this colour by writing a value to the memory location A003 using its standard memory write instruction. Using the same method, graphs can be displayed on a screen by writing character values into a special area of RAM within the video controller. Prior to cheap RAM that enabled bit-mapped displays, this character cell method was a popular technique for computer video displays (see Text user interface).