Mean Time Between Failures
Mean time between failures (MTBF) is the predicted elapsed time between inherent failures of a system during operation. MTBF can be calculated as the arithmetic mean (average) time between failures of a system. The MTBF is typically part of a model that assumes the failed system is immediately repaired (MTTR), as a part of a renewal process. This is in contrast to the mean time to failure (MTTF), which measures average time to failures with the modeling assumption that the failed system is not repaired (infinite repair rate).
The definition of MTBF depends on the definition of what is considered a system failure. For complex, repairable systems, failures are considered to be those out of design conditions which place the system out of service and into a state for repair. Failures which occur that can be left or maintained in an unrepaired condition, and do not place the system out of service, are not considered failures under this definition. In addition, units that are taken down for routine scheduled maintenance or inventory control, are not considered within the definition of failure.
Read more about Mean Time Between Failures: The Overview, Formal Definition of MTBF, Variations of MTBF
Famous quotes containing the words time and/or failures:
“The death of Irving, which at any other time would have attracted universal attention, having occurred while these things were transpiring, went almost unobserved. I shall have to read of it in the biography of authors.”
—Henry David Thoreau (1817–1862)
“Any honest examination of the national life proves how far we are from the standard of human freedom with which we began. The recovery of this standard demands of everyone who loves this country a hard look at himself, for the greatest achievments must begin somewhere, and they always begin with the person. If we are not capable of this examination, we may yet become one of the most distinguished and monumental failures in the history of nations.”
—James Baldwin (1924–1987)