Injection Molding - Equipment

Equipment

Injection molding machines consist of a material hopper, an injection ram or screw-type plunger, and a heating unit. They are also known as presses, they hold the molds in which the components are shaped. Presses are rated by tonnage, which expresses the amount of clamping force that the machine can exert. This force keeps the mold closed during the injection process. Tonnage can vary from less than 5 tons to over 9,000 tons, with the higher figures used in comparatively few manufacturing operations. The total clamp force needed is determined by the projected area of the part being molded. This projected area is multiplied by a clamp force of from 2 to 8 tons for each square inch of the projected areas. As a rule of thumb, 4 or 5 tons/in2 can be used for most products. If the plastic material is very stiff, it will require more injection pressure to fill the mold, thus more clamp tonnage to hold the mold closed. The required force can also be determined by the material used and the size of the part, larger parts require higher clamping force.

Read more about this topic:  Injection Molding

Famous quotes containing the word equipment:

    Pop artists deal with the lowly trivia of possessions and equipment that the present generation is lugging along with it on its safari into the future.
    —J.G. (James Graham)

    At the heart of the educational process lies the child. No advances in policy, no acquisition of new equipment have their desired effect unless they are in harmony with the child, unless they are fundamentally acceptable to him.
    —Central Advisory Council for Education. Children and Their Primary Schools (Plowden Report)

    Why not draft executive and management brains to prepare and produce the equipment the $21-a-month draftee must use and forget this dollar-a-year tommyrot? Would we send an army into the field under a dollar-a-year General who had to be home Mondays, Wednesdays and Fridays?
    Lyndon Baines Johnson (1908–1973)