Holiday Mansion - Overview

Overview

Most Holiday Mansion hulls were a modified cathedral bow entry that sloped slightly to an almost flat bottom at the stern. A substantial center skeg allowed fair stability for tracking in some models. The normal single or dual inboard/outdrive power combination provided enough power for cruising. Higher output engines enabled many boats in the 35 – 39 foot range to ride on plane and even pull skiers.

Displacement for the dry boats was around 16,000 lb (7.25 metric tons) for the basic 35’ model to over 22,000 lb (10 metric tons) for the 49’ coastal models. Fully outfitted and fueled, the boats could displace much more. This meant that weekenders and live-aboards alike could keep the boats loaded with equipment and stores and still be able to cruise safely and efficiently.

Although many different models were offered with hundreds of possible variations, the general layout and configuration of the boats were rather consistent between models. Most boats had an upper salon with helm controls at deck level. Aft and a few feet lower than deck, a galley with a convertible settee was standard. Below the salon was a cuddy cabin consisting of two double beds with a narrow passage between them. Sometimes a storage locker or dresser was installed in place of one of the berths or the berth width was lessened to accommodate it. A stand-up head was placed under the helm allowing room for an enclosed stand-up shower or 36” tub surround in addition to the head and small sink.