The 20th Century
At the beginning of the 20th century, the stockless anchors principally in use in the British navy are Hall's improved, Byer's, and Wasteneys Smith's.
In Hall's improved anchor, the arms and crown of cast steel are in one piece, and the shank of forged steel passes up through an aperture in the crown to which it is secured by two cross bolts. Two trunnions or lugs are forged to the lower end of the shank.
In W.L. Byer's plan, the flukes and crown consist of a steel-casting secured to a forged shank by a through bolt of mild steel, the axis of which is parallel to the points of the flukes; one end of the bolt has a head, but the other is screwed and fitted with a phosphor bronze nut to allow the bolt to be withdrawn for examination. A palm is cast on each side of the crown to trip the flukes when the anchor is on the ground, and for bringing them snug against the ship's side when weighing.
Wasteneys Smith's anchor is composed of three main parts, the shank and crown which form one forging, and the two flukes or arms which are separate castings. A bolt passes through the crown of the anchor, connecting the flukes to it; to prevent the flukes working off the connecting through bolt, two smaller bolts pass though the flukes at right angles to the through bolt and are recessed half their diameter into it.
Read more about this topic: History Of The Anchor