History of The Anchor - The 19th Century

The 19th Century

Until the beginning of the 19th century anchors were of imperfect manufacture, the means of effecting good and efficient welding being absent and the iron poor, whilst the arms, being straight, generally parted at the crown, when weighing from good holding-ground. A clerk in Plymouth Yard, named Pering, in the early part of that century (1813) introduced curved arms; and after 1852 the British admiralty anchor, under the direction of the Board, was supplied to H.M. ships, followed by Lieutenant (afterwards Captain) Rodger's anchor. Rodger's anchor marked a great departure from the form of previous anchors. The arms were formed in one piece, and were pivoted at the crown on a bolt passing through the forked shank. The points or pees to the palms were blunt. This anchor had an excellent reputation amongst nautical men of that period, and by the committee on anchors, appointed by the British admiralty in 1852, it was placed second only to the anchor of Trotman.

Later came the self-canting and close-stowing Martin anchor, which, passing through successive improvements, became the improved Martin anchor made of forged iron. A projection in the center of the arms works in a recess at the hub of the shank; the vacancies outside the shank are filled by blocks bolted through on each side, and are flush with the side plates, which keep the flukes in position.

The introduction of cast steel in 1894 led to the improved Martin-Adelphi pattern, in which the crown and arms are cast in one, and, with the stock, are made of cast steel, the shank remaining of forged iron. A projection in the crown works in a recess (right image), and is secured in its place by a forged steel pin, fitted with a nut and washer, which passes through the crown and the heel of the shank.

All of the above anchors were provide with a stock, the use of which is to "cant" the anchor. If it falls on the ground, resting on one arm and one stock, when a strain is brought on the cable, the stock cants the anchor, causing the arms to lie at a downward angle to the holding ground; and the pees enter and bury themselves below the surface of the soil.

Stockless anchors have been extensively used in the British mercantile marine and in some other navies. In 1903 they were adopted generally for the British Navy, after extensive anchor trials, begun in 1885. Their advantages are: handiness combined with a saving of time and labor; absence of davits, anchor-beds, and other gear, with a resulting reduction in weight; and a clear forecastyle for "right ahead" gun fire or for working ship. On the other hand a larger hawsepipe is required, and there appears to be a consensus that a stockless anchor, when "let go" does not hold so quickly as a stocked one, is more uncertain in its action over uneven ground, and is more liable to "come home" (drag).