Graphics Tablet-screen Hybrid - Operation

Operation

There have been many attempts to categorize the technologies that have been used for graphics tablets:

Passive tablets

Passive tablets, most notably those by Wacom, make use of electromagnetic induction technology, where the horizontal and vertical wires of the tablet operate as both transmitting and receiving coils (as opposed to the wires of the RAND Tablet which only transmit). The tablet generates an electromagnetic signal, which is received by the LC circuit in the stylus. The wires in the tablet then change to a receiving mode and read the signal generated by the stylus. Modern arrangements also provide pressure sensitivity and one or more switches (similar to the buttons on a mouse), with the electronics for this information present in the stylus itself, not the tablet. On older tablets, changing the pressure on the stylus nib or pressing a switch changed the properties of the LC circuit, affecting the signal generated by the pen, which modern ones often encode into the signal as a digital data stream. By using electromagnetic signals, the tablet is able to sense the stylus position without the stylus having to even touch the surface, and powering the pen with this signal means that devices used with the tablet never need batteries. Activslate 50, the model used with Promethean Ltd white boards, also uses a hybrid of this technology.

Active tablets

Active tablets differ in that the stylus used contains self-powered electronics that generate and transmit a signal to the tablet. These styli rely on an internal battery rather than the tablet for their power, resulting in a bulkier stylus. Eliminating the need to power the pen means that such tablets may listen for pen signals constantly, as they do not have to alternate between transmit and receive modes, which can result in less jitter.

Optical tablets

Optical tablets operate by a very small digital camera in the stylus, and then doing pattern matching on the image of the paper. The most successful example is the technology developed by Anoto.

Acoustic tablets

Early models were described as spark tablets—a small sound generator was mounted in the stylus, and the acoustic signal picked up by two microphones placed near the writing surface. Some modern designs are able to read positions in three dimensions.

Electromagnetic tablets

Wacom's are one example of a graphics tablet that works by generating and detecting an electromagnetic signal: in the Wacom design, the signal is generated by the pen, and detected by a grid of wires in the tablet. Other designs such as those by Pencept generate a signal in the grid of wires in the tablet, and detect it in the pen.

Capacitive tablets

These tablets have also been designed to use an electrostatic or capacitive signal. Scriptel's designs are one example of a high-performance tablet detecting an electrostatic signal. Unlike the type of capacitive design used for touchscreens, the Scriptel design is able to detect the position of the pen while it is in proximity to, or hovering above, the tablet. Many multi-touch tablets use capacitive sensing.

For all these technologies, the tablet can use the received signal to also determine the distance of the stylus from the surface of the tablet, the tilt (angle from vertical) of the stylus, and other information in addition to the horizontal and vertical positions.

Compared to touch-sensitive touchscreens, a graphics tablet generally offers much higher precision, the ability to track an object which is not touching the tablet, and can gather much more information about the stylus, but is typically more expensive, and can only be used with the special stylus or other accessories.

Some tablets, especially inexpensive ones aimed at young children, come with a corded stylus, using technology similar to older RAND tablets, although this design is no longer used on any normal tablets.