Gauge Block - History

History

The gauge block set, also known as "Jo Blocks", was developed by the Swedish inventor Carl Edvard Johansson. Johansson was employed in 1888 as an armourer inspector by the state arsenal Carl Gustafs stads Gevärsfaktori in the town of Eskilstuna, Sweden. He was concerned with the expensive tools for measuring parts for the Remington rifles then in production under license at Carl Gustaf. When Sweden adopted a tailored variant of the Mauser carbine in 1894, Johansson was very excited about the chance to study Mauser's methods of measuring, in preparation for production under license at Carl Gustaf (which began several years later). However, a visit to the Mauser factory in Oberndorf am Neckar, Germany, turned out to be a disappointment. On the train home, he thought about the problem, and he came up with the idea of a set of blocks that could be combined to make up any measure.

There had already been a long history of increasing use of gauges up to this time, such as gauges for filing and go/no go gauges, which were custom-made individually in a toolroom for use on the shop floor; but there had never been super-precision gauge blocks that could be wrung together to make up different lengths, as Johansson now envisioned.

Back home, Johansson converted his wife's Singer sewing machine to a grinding and lapping machine. He preferred to carry out this precision work at home, as the grinding machines at the rifle factory were not good enough. His wife, Margareta, helped him a lot with the grinding besides the household work. Once Johansson had demonstrated his set at Carl Gustaf, his employer provided time and resources for him to develop the idea. Johansson was granted his first Swedish patent on 2 May 1901, SE patent No. 17017, called "Gauge Block Sets for Precision Measurement". Johansson formed the Swedish company CE Johansson AB (also known as 'CEJ') on 16 March 1917.

Johansson spent many years in America; during his life he crossed the Atlantic 22 times. The first CEJ gauge block set in America was sold to Henry M. Leland at the Cadillac Automobile Company around 1908. The first manufacturing plant in America for his gauge block sets was established in Poughkeepsie, Dutchess County, New York, in 1919. The economic environment of the post–World War I recession and depression of 1920–21 did not turn out so well for the company, so in 1923 he wrote a letter to Henry Ford of the Ford Motor Company, where he proposed a cooperation in order to save his company. Henry Ford became interested, and on 18 November 1923 he began working for Henry Ford in Dearborn, Michigan. Hounshell (1984), citing Althin (1948) and various archive primary sources, says, "Henry Ford purchased the famous gaugemaking operation of the Swede C. E. Johansson in 1923 and soon moved it into the laboratory facility in Dearborn. Between 1923 and 1927, the Johansson division supplied 'Jo-blocks' to the Ford toolroom and any manufacturer who could afford them. It also made some of the Ford 'go' and 'no-go' gauges used in production as well as other precision production devices."

In 1936, at the age of 72, Johansson felt it was time to retire and go back to Sweden. He was awarded the large gold medal of the Royal Swedish Academy of Engineering Sciences in 1943, shortly after his death.

At some point the C.E. Johansson brand (or at least its U.S. presence) became affiliated with Brown & Sharpe, and blocks co-branded with the C.E. Johansson and Brown & Sharpe logos were made. Blocks co-branded with the C.E. Johansson and Ford logos are also sometimes still seen in use today.