Forksville Covered Bridge - Bridge Data

Bridge Data

The following table is a comparison of published measurements of length, width and load recorded by four different sources using different methods, as well as the name cited for the bridge and its builder. The NBI measures bridge length between the "backwalls of abutments" or pavement grooves and the roadway width as "the most restrictive minimum distance between curbs or rails". The NRHP form was prepared by the Pennsylvania Historical and Museum Commission (PHMC), which surveyed county engineers, historical and covered bridge societies, and others for all the covered bridges in the commonwealth. The Evans visited every covered bridge in Pennsylvania in 2001 and measured each bridge's length (portal to portal) and width (at the portal) for their book. The data in Zacher's book was based on a 1991 survey of all covered bridges in Pennsylvania by the PHMC and PennDOT, aided by local government and private agencies. The article uses primarily the NBI and NRHP data, as they are national programs.

Variants in Forksville Covered Bridge data
Length
feet (m)
Width
feet (m)
Load
short tons (MT)
Name
used
Builder Source
(Year)
152 feet 11 inches (46.6 m) 12 feet 2 inches (3.7 m) 3.0 short tons (2.7 t) SR 4012 NA NBI (2009)
146 feet (44.5 m) 15 feet (4.6 m) NA Forksville Sadler Rogers NRHP (1980)
163 feet 3 inches (49.8 m) 18 feet 10.5 inches (5.8 m) NA Forksville Sadler Rodgers Evans (2001)
130 feet (39.6 m) 15 feet (4.6 m) NA Forksville Sadler Rodgers Zacher (1994)

Read more about this topic:  Forksville Covered Bridge

Famous quotes containing the words bridge and/or data:

    Like a bridge over troubled water
    I will lay me down.
    Paul Simon (b. 1949)

    To write it, it took three months; to conceive it three minutes; to collect the data in it—all my life.
    F. Scott Fitzgerald (1896–1940)