Fiberglass Spray Lay-up Process
Fibreglass spray lay-up process is very different from the hand lay-up process. The difference comes from the application of the fibre and resin material to the mould. Spray-up is an open-moulding composites fabrication process where resin and reinforcements are sprayed onto a reusable mould. The resin and glass may be applied separately or simultaneously "chopped" in a combined stream from a chopper gun. Workers roll out the spray-up to compact the laminate. Wood, foam, or other core material may then be added, and a secondary spray-up layer embeds the core between the laminates. The part is then cured, cooled, and removed from the mould.
Read more about Fiberglass Spray Lay-up Process: Applications, Basic Materials, Processing Requirements, Manufacturing Process, Advantages, Limitations, Hazards
Famous quotes containing the words spray and/or process:
“I discovered
the colors in the wall that woke
when spray from the hose
played on its pocks and warts....”
—Denise Levertov (b. 1923)
“Consumer wants can have bizarre, frivolous, or even immoral origins, and an admirable case can still be made for a society that seeks to satisfy them. But the case cannot stand if it is the process of satisfying wants that creates the wants.”
—John Kenneth Galbraith (b. 1908)