Effect On Work Material
Certain laminating techniques use two steps of applying the epoxy to form resin impregnated fiber glass sheets. In the first step there is a resin solvent mixture which is partially cured so it will not redissolve in a second coating of the same mixture. The same resin mixture is subsequently given to the covered fiberglass with moderately cured resin in the second step. This second glaze which covers the first fills in the empty spaces between the fibers. The second coating is also only partially cured. This partial curing of the second layer furthers the curing of the first epoxy layer. This process also produces a thin sticky layer. The first coating acts like a sealed insulating sheet, preventing glass fiber contact with conductive planes. The second coating fills the planes and can form adhesive bonds to cores and conductive layers.
Read more about this topic: Fiberglass Sheet Laminating
Famous quotes containing the words effect, work and/or material:
“Even a purely moral act that has no hope of any immediate and visible political effect can gradually and indirectly, over time, gain in political significance.”
—Václav Havel (b. 1936)
“The division between the useful arts and the fine arts must not be understood in too absolute a manner. In the humblest work of the craftsmen, if art is there, there is a concern for beauty, through a kind of indirect repercussion that the requirements of the creativity of the spirit exercise upon the production of an object to serve human needs.”
—Jacques Maritain (1882–1973)
“This is the essential distinction—even opposition—between the painting and the film: the painting is composed subjectively, the film objectively. However highly we rate the function of the scenario writer—in actual practice it is rated very low—we must recognize that the film is not transposed directly and freely from the mind by means of a docile medium like paint, but must be cut piece-meal out of the lumbering material of the actual visible world.”
—Sir Herbert Read (1893–1968)