The Ethernet physical layer is the physical layer component of the Ethernet family of computer network standards.
The Ethernet physical layer evolved over a considerable time span and encompasses quite a few physical media interfaces and several magnitudes of speed. The speed ranges from 1 Mbit/s to 100 Gbit/s while the physical medium can range from bulky coaxial cable to twisted pair to optical fiber. In general, network protocol stack software will work similarly on all physical layers.
10 Gigabit Ethernet is becoming more popular in both enterprise and carrier networks, with 40 Gbit/s and 100 Gbit/s Ethernet ratified. Higher speeds are under development. Robert Metcalfe, one of the co-inventors of ethernet, now believes commercial applications using terabit Ethernet may occur by 2015 though he says existing Ethernet standards may have to be overthrown to reach terabit Ethernet.
Many Ethernet adapters and switch ports support multiple speeds, using autonegotiation to set the speed and duplex for the best values supported by both connected devices. If auto-negotiation fails, a multiple speed device will sense the speed used by its partner, but will assume half-duplex. A 10/100 Ethernet port supports 10BASE-T and 100BASE-TX. A 10/100/1000 Ethernet port supports 10BASE-T, 100BASE-TX, and 1000BASE-T.
Read more about Ethernet Physical Layer: Terabit and Beyond, "First Mile", Twisted-pair Cable, Minimum Cable Lengths, Related Standards
Famous quotes containing the words physical and/or layer:
“Self-esteem is as important to our well-being as legs are to a table. It is essential for physical and mental health and for happiness.”
—Louise Hart (20th century)
“After a few months’ acquaintance with European “coffee,” one’s mind weakens, and his faith with it, and he begins to wonder if the rich beverage of home, with its clotted layer of yellow cream on top of it, is not a mere dream after all, and a thing which never existed.”
—Mark Twain [Samuel Langhorne Clemens] (1835–1910)