Selecting A Dust Collector
Dust collectors vary widely in design, operation, effectiveness, space requirements, construction, and capital, operating, and maintenance costs. Each type has advantages and disadvantages. However, the selection of a dust collector should be based on the following general factors:
- Dust concentration and particle size - For minerals processing operations, the dust concentration can range from 0.1 to 5.0 grains (0.32 g) of dust per cubic feet of air (0.23 to 11.44 grams per standard cubic meter), and the particle size can vary from 0.5 to 100 µm.
- Degree of dust collection required - The degree of dust collection required depends on its potential as a health hazard or public nuisance, the plant location, the allowable emission rate, the nature of the dust, its salvage value, and so forth. The selection of a collector should be based on the efficiency required and should consider the need for high-efficiency, high-cost equipment, such as electrostatic precipitators; high-efficiency, moderate-cost equipment, such as baghouses or wet scrubbers; or lower cost, primary units, such as dry centrifugal collectors.
- Characteristics of airstream - The characteristics of the airstream can have a significant impact on collector selection. For example, cotton fabric filters cannot be used where air temperatures exceed 180°F (82°C). Also, condensation of steam or water vapor can blind bags. Various chemicals can attack fabric or metal and cause corrosion in wet scrubbers.
- Characteristics of dust - Moderate to heavy concentrations of many dusts (such as dust from silica sand or metal ores) can be abrasive to dry centrifugal collectors. Hygroscopic material can blind bag collectors. Sticky material can adhere to collector elements and plug passages. Some particle sizes and shapes may rule out certain types of fabric collectors. The combustible nature of many fine materials rules out the use of electrostatic precipitators.
- Methods of disposal - Methods of dust removal and disposal vary with the material, plant process, volume, and type of collector used. Collectors can unload continuously or in batches. Dry materials can create secondary dust problems during unloading and disposal that do not occur with wet collectors. Disposal of wet slurry or sludge can be an additional material-handling problem; sewer or water pollution problems can result if wastewater is not treated properly.
Read more about this topic: Dust Collector
Famous quotes containing the words selecting a, selecting, dust and/or collector:
“If marriages were made by putting all the men’s names into one sack and the women’s names into another, and having them taken out by a blindfolded child like lottery numbers, there would be just as high a percentage of happy marriages as we have here in England.... If you can tell me of any trustworthy method of selecting a wife, I shall be happy to make use of it.”
—George Bernard Shaw (1856–1950)
“But compared with the task of selecting a piece of French pastry held by an impatient waiter a move in chess is like reaching for a salary check in its demand on the contemplative faculties.”
—Robert Benchley (1889–1945)
“The Dust did scoop itself like Hands
And threw away the Road.”
—Emily Dickinson (1830–1886)
“Though collecting quotations could be considered as merely an ironic mimetism—victimless collecting, as it were ... in a world that is well on its way to becoming one vast quarry, the collector becomes someone engaged in a pious work of salvage. The course of modern history having already sapped the traditions and shattered the living wholes in which precious objects once found their place, the collector may now in good conscience go about excavating the choicer, more emblematic fragments.”
—Susan Sontag (b. 1933)