Direct injection expanded foam molding (also known as injection molded foam) is a foam manufacturing process that creates soft foam products direct from compound into a final product. This process eliminates the steps required for die-cutting and compression molding, as it manufactures the foam and the product simultaneously.
The base resin used in a complex formula, is an ethylene based polyolefin elastomer (like polyethylene and EVA). Foam manufactured with these resins has many physical benefits. Unlike a sponge, foams from this process are closed-cell, meaning it's waterproof and resists mold, mildew and bacteria from entering the material.
It is also cross-linked, which means that the cells are connected in a way that makes the foam strong and durable with high tear and tensile strength.
All polyolefin elastomers are also resistant to most chemicals, which allow the products to not only be used in a chemical environment, but also very cleanable with most household cleaners.
The process itself is known to be very interesting, because the injected compound is not foam, until an endothermic reaction in a hot mold activates the blowing agents, resulting in an expanded foam part. This requires the mold cavity size to be smaller than the final part. The actual known expansion is created within the formula, so that when the part "self-ejects" from the mold at the end of the cycle, it grows to the required part size.
The cavity for a tire is considerably smaller than the final tire size. This process is valuable for any foam product that needs to have lots of detail. It needs to be very durable.
Famous quotes containing the words direct, expanded, foam and/or molding:
“One should never direct people towards happiness, because happiness too is an idol of the market-place. One should direct them towards mutual affection. A beast gnawing at its prey can be happy too, but only human beings can feel affection for each other, and this is the highest achievement they can aspire to.”
—Alexander Solzhenitsyn (b. 1918)
“The very nursery tales of this generation were the nursery tales of primeval races. They migrate from east to west, and again from west to east; now expanded into the “tale divine” of bards, now shrunk into a popular rhyme.”
—Henry David Thoreau (1817–1862)
“Only the white, tremendous foam of the street has any importance,
The new white flowers that are beginning to shoot up about now.”
—John Ashbery (b. 1927)
“To translate, one must have a style of his own, for otherwise the translation will have no rhythm or nuance, which come from the process of artistically thinking through and molding the sentences; they cannot be reconstituted by piecemeal imitation. The problem of translation is to retreat to a simpler tenor of one’s own style and creatively adjust this to one’s author.”
—Paul Goodman (1911–1972)