Cooper Vane

A Cooper vane (also sometimes called a "Dan Cooper switch" or "D.B. Cooper device") is a mechanical aerodynamic wedge that prevents the ventral airstair of an aircraft being lowered in flight. In the United States, following three hijackings in 1972, the Federal Aviation Administration ordered that Boeing 727 aircraft be fitted with Cooper vanes. The device was named for famed airplane hijacker D. B. Cooper, who used the rear stairway to exit a Boeing 727 in flight and make his escape via parachute.

The Cooper vane is a very simple device consisting of a spring-loaded paddle connected to a plate. When the aircraft is on the ramp, the spring keeps the paddle perpendicular to the fuselage, and the attached plate does not block the stairway. As the aircraft takes off, the airflow pushes the paddle parallel to the fuselage and the plate is moved underneath the stairway, preventing it being lowered. Once the airflow decreases on landing, the spring-loaded paddle returns to its initial position, thereby allowing the stairs to be lowered again. Although this device was intended to prevent hijackings aboard the 727 and other aircraft with a ventral airstair, many airlines sealed the airstair entirely, never to use it again.

Douglas DC 9 aircraft with ventral stairs were also equipped with Cooper vanes. The DC 9-21 used for skydiving at the 2006 World Free Fall Convention in Rantoul, Illinois had one installed, but since the rear pressure bulkhead door and the stairs had been removed to facilitate fast jumper exits, the vane, which was left in place, did not prevent jumps.