Chronograph - Function

Function

Most chronographs are extremely complicated devices, which require a lot of background in engineering to fully understand how they work but this is not the case with the original chronograph. Rieussec’s chronograph was fairly simple and easy to understand. It was composed of two faces, a top and bottom face. The bottom face held a pool of ink, while the upper had a pen-like needle attached to it. When activated, the upper face pushed down on the lower face, while revolving around a central axis, which pulled the needle. This dragged the ink, in a circular fashion, recording the time elapsed by the line of ink that the motion created. There was room left for improvement, because Rieussec’s chronograph was not easily ready for multiple uses.

This paved the way for the hundreds of patents that have been handed out to people for updating and upgrading this device. Automatic, non-digital chronographs do not require a battery, because the arm or wrist of the wearer creates kinetic energy, which results in the total energy source needed for this device to work. Throughout the day, while the wearer of the watch is walking, the swinging motion of his arm forces a semicircular rotor to turn on a pivot within the watch. The rotor is attached to a ratchet that winds the mainspring in the watch, so that it is ready for use at all times.

The modern day chronograph works by pushing a start button, normally located at the two o clock position, to begin recording time, and by pushing the same button to stop the recording. When the button is pushed to start the recording, a series of three (in more complicated and more precise chronographs there are more wheels) train wheels start turning. The smallest has a revolution time of one second, the next sixty seconds, and the final one has a revolution time of sixty minutes. The three train wheels interact with one another and record how long it has been since the start button has been activated.