Chirp Spread Spectrum - Uses

Uses

Chirp spread spectrum was originally designed to compete with ultra-wideband for precision ranging and low-rate wireless networks in the 2.45 GHz band. However, since the release of IEEE 802.15.4a (also known as IEEE 802.15.4a-2007), it is no longer actively being considered by the IEEE for standardization in the area of precision ranging. Currently, Nanotron Technologies, which produces real-time location devices and was the primary force behind getting CSS added to IEEE 802.15.4a, is the only seller of wireless devices using CSS. In particular, their primary product, the nanoLOC TRX transceiver, uses CSS and is marketed as a network device with real-time location and RFID abilities. Some areas where this type of technology can be useful are medical applications, logistics (i.e. containers need to be tracked), and government/security applications. Nanotron even tested the TRX Transceiver for industrial monitoring and control in a steel mill and it survived when the computer and display that were interfacing with it failed because of the heat.

Chirp spread spectrum is ideal for applications requiring low power usage and needing relatively low data rates (1 Mbit/s or less). In particular, IEEE 802.15.4a specifies CSS as a technique for use in Low-Rate Wireless Personal Area Networks (LR-WPAN). However, whereas IEEE 802.15.4-2006 standard specifies that WPANs encompass an area of 10 m or less, IEEE 802.15.4a-2007, specifies CSS as a physical layer to be used when longer ranges and devices moving at high speeds are part of your network. Nanotron's CSS implementation was actually seen to work at a range of 570 meters between devices. Further, Nanotron's implementation can work at data rates of up to 2 Mbit/s - higher than specified in 802.15.4a. Finally, the IEEE 802.15.4a PHY standard actually mixes CSS encoding techniques with differential phase shift keying modulation (DPSK) to achieve better data rates.

Chirp spread spectrum may also be used in the future for military applications as it is very difficult to detect and intercept when operating at low power.

Very similar frequency swept waveforms are used in frequency modulated continuous wave radars to measure range (distance); an unmodulated continuous wave Doppler radar can only measure range-rate (relative velocity along the line of sight). FM-CW radars are very widely used as radio altimeters in aircraft.