BT Tank - Technical Legacy

Technical Legacy

The BT tank series was numerous, forming the cavalry tank arm of the Red Army in the 1930s, and had much better mobility than other contemporary tank designs. For these reasons, there were many experiments and derivatives of the design, mostly conducted at the KhPZ factory in Kharkov.

The most important legacy of the BT tank was the T-34 medium tank, arguably the most important tank of World War II. In 1937, a new design team was formed at the KhPZ to create the next generation of BT tanks. Initially, the chief designer was Mikhail Koshkin and, after his death, Morozov. The team built two prototypes. The light one was called the A-20. The more heavily armed and armoured BT derivative, the A-32, was a "universal tank" to replace all the T-26 infantry tank, BT cavalry tanks, and the T-28 medium tanks. Such a plan was controversial, but concerns about tank performance under the threat of German blitzkrieg led to the approval for production of a still more heavily-armoured version, the T-34 medium tank.

Along the way, an important technical development was the BT-IS and BT-SW-2 testbed vehicles, concentrating on sloped armour. This proof-of-concept led directly to the armour layout of the T-34.

BT tank chassis were also used as the basis for engineering support vehicles and mobility testbeds. A bridgelayer variant had a T-38 turret and launched a bridge across small gaps. Standard tanks were fitted as fascine carriers. The RBT-5 hosted a pair of large artillery rocket launchers, one on each side of the turret. Several designs for extremely wide tracks, including, oddly, wooden 'snowshoes' were tried on BT tanks.

The KBT-7 was a thoroughly modern armoured command vehicle that was in the prototype stage when World War II broke out. The design was not pursued during the war.

In the Kiev maneuvers of 1936, foreign military observers were shown hundreds of BT tanks roll by a reviewing stand. In the audience were British Army representatives, who returned home to advocate for use of Christie suspension on British cruiser tanks which they incorporated from the Cruiser Mk III onwards. Interestingly, the pointed shape of the hull front armor on the BT tank also influenced the design of the British Matilda tank.